Javascript required
Skip to content Skip to sidebar Skip to footer

How to Prime a V8 Baby T8 Coil

There is a right way to prime SMOK TFV 8 coils and and then at that place is a significantly Better way to prime number SMOK TFV 8 coils. In this guide, we'll show you the best way to prime your SMOK TFV8 coils!


The SMOK TFV 8 is still one of my favorite go-to vape tanks. I actually adopt it to SMOK'southward newer TFV12 tanks.

Though to go the absolute all-time out of the TFB8 tank, and save yourself a fortune on coils, you need to larn how to prime SMOK TFV 8 coils properly.

>>>Click Hither To Skip Straight Down To The Guide…

I don't know where yous bought your SMOK TFV 8 from merely if it was a vape shop, chances are they told you to "prime number the coils" before using it.

This is practiced advice because not priming them is a sure fire way of called-for out your coils in no fourth dimension at all.

And at $x to $15 a pack, you definitely do not want to exist doing this.

I've been using the SMOK TFV 8 for AGES at present, but I simply recently happened on a new way of priming the coils.

How did I find this new method?

Simple: I got pissed off when I burnt out two coils in the space of a couple of days.

I primed them as instructed, a few drops of juice onto the ringlet. I so loaded the tank up with juice and left it to rest and soak upwardly the E Juice for 10 minutes.

This is basically the way most people prime number the SMOK TFV 8 as well as other sub-ohm tank coils.

But it'due south wrong .

And it doesn't work that well.

Sure, you might go lucky sometimes and information technology primes OK, but seven times outta ten your ringlet is going to die prematurely – particularly if yous run the SMOK TFV 8 at the advertised wattage settings.

SMOK TFV 8 Coils Burn down Out Likewise Chop-chop

I accept spent a good deal of money on SMOK TFV eight coils over the past 18 months.

Way more than than I intendance to think nearly, and this got me thinking:

Is there some kind of conspiracy going on hither? Is SMOK deliberately Non telling us to prime number its coils, then we end up ownership more than?

Perhaps, I thought.

SMOK is a business, after all.

Information technology likes making money, and once information technology's sold y'all a tank, it's next-best acquirement line is coils – lots and lots of coils.

Maybe.

Either way, information technology pays to larn how to extend the life of your TFV8 coils.

Problem Solved?

Afterwards I burnt out two SMOK TFV eight coils in the space of two days, I decided to sit downwards and think almost the limerick of the coil itself, what fabricated it tick, and how it was designed. I drew three conclusions:

  • The coils are massive and densely packed with cotton
  • The coils sit on shelves for months before they're used
  • Dry hits occur when cotton fiber burns

Armed with this knowledge, I cracked open a new coil and tested my theory: I primed the shit out of that cotton, drenching it in E Juice and I connected to practise this for ii minutes or and so.

Y'all want to hold the scroll in tissue when you lot exercise this and apply the juice directly to the cotton, as shown beneath in the prototype:

How To Prime SMOK TFV 8 Coils PROPERLY

You know when the cotton is completely soaked because the exposed cotton on the side of the coil becomes sodden.

When this happens, add together a little more but to be sure, then load her up on your mod and vape.

BOOM – perfect priming every time.

To Recap – How To Prime SMOK Coils Correctly

  • Hold Curlicue Head In Tissue
  • Employ E Juice Directly To The Cotton
  • Continue Doing This Until It Is Completely Saturated
  • Check Sides of Coil To Check Information technology's 100% Soaked
  • At present Install Information technology Into The Tank & Fill up Information technology Upwards
  • Let Information technology Sit down For two Minutes & Y'all're Done!

Why This Works For SMOK TFV8 Coils?

The cotton within the coil, as I mentioned earlier, is densely packed in. There is a ton of cotton jammed inside that thing, and you need to ensure that ALL of information technology is drenched in E Juice.

The cotton wool is likewise super dried out besides. Think about it: it's vacuum sealed and has been sat on a shelf or in a warehouse for months on terminate. No wonder information technology'southward drier than an Irish gaelic pub in Dubai.

I have tried this method with my last five coils and it has worked like a charm every single time. In fact, it has completely reinvigorated my love of the SMOK TFV eight, which for at least the last six months has been sat in my drawer collecting dust!

This doesn't simply apply to SMOK coils – though it will piece of work on all of them – but also any sub-ohm tank that features big, multi-coil systems likewise.

I tried it with UWELL Crown 3 coils, the Vaporesso ESTOK, and the Aspire Cleito and it worked a treat on all of them.

All yous have to remember is that the cotton in any gyre, big or pocket-sized, is dry and compacted. Information technology will take time to soak up the E Juice, so make sure you DRENCH it in the stuff!

If yous're unhappy with SMOK tanks, y'all should check out our Guide To The #1 Vape Tanks Right At present. The best of the all-time from that guide are included in the table below:


Drake Equation

Co-founder and Editor of VapeBeat. I make the words.

How to Prime a V8 Baby T8 Coil

Source: https://vapebeat.com/vape-user-guides/how-to-prime-smok-tfv-8-coils-properly