Adat Not Reading Ua Apollo Focusrite Saffire Pro
Connecting to a Scarlett with ADAT
New Scarlett owners! Become started with our Scarlett setup guide.
The Focusrite 18i8 and 18i20 all accept ADAT connections that let you increase your aqueduct count by connecting another digital device. In this commodity we'll show y'all how to connect, sync, and route ADAT devices with your Scarlett series interface. This guide breaks downwards into two parts:
- What is ADAT?
- Connect to Scarlett with ADAT
ADAT is brusque for Alesis Digital Audio Record. ADAT inputs are typically used for adding more input channels via boosted microphone preamps and audio interfaces. Both 18i8 and 18i20 have ADAT Optical input jacks for 8 more inputs at 44.1 & 48 kHz, and only four additional channels are available when recording at 88.2 & 96 kHz. ADAT Outputs are generally used to send signal out of your Scarlett to external devices like headphone distribution systems and D/A converters. Merely like ADAT inputs, college sample rates will as well reduce the amount of output channels.
Connecting another device to your Scarlett via ADAT is really just a matter of connecting the cables, synchronizing both devices, and so setting upward the routing. Synchronizing two digital devices might sound a lilliputian intimidating but if you follow the steps beneath, you lot'll exist surprised just how easy it is.
- Using a Toslink cable, connect the ADAT output of the external device to OPTICAL INPUT of your Scarlett interface.
- Set all devices in the organization to the same sample rate (44.i kHz, 48 kHz, etc.).
- Set up your devices' clock settings so that all devices are receiving clock signal from a single primary device.
- Route the signal in your DAW or Focusrite Command:
- DAW: Assign your runway's input to the appropriate ADAT input channel(s).
- Focusrite Control: Add the ADAT channels to a Scarlett Output's Mix or choose them every bit the direct output.
- If you encounter connection issues, please visit our guide on resolving audio interface issues on PC and Mac.
- Using a Toslink cable, connect the OPTICAL OUTPUT of your Scarlett to the external device's ADAT input.
- Set all devices in the arrangement to the same sample rate (44.1 kHz, 48 kHz, etc.).
- Set your device'south clock settings so that all devices are receiving clock signal from a single master device.
- Route the betoken in your DAW or Focusrite Control:
- DAW: Assign your track'southward output to the appropriate ADAT output channel(s).
- Focusrite Control: Select the ADAT output's source: Mix, DAW, or direct output.
Scarlett 6i6, 8i6, 18i8, and 18i20 interfaces also have S/PDIF connections. Due south/PDIF connections are typically used to connect an additional input and output stereo indicate with another Due south/PDIF equipped device. Visit our Connecting to a Scarlett with S/PDIF page to read more than.
CONNECT WITH Due south/PDIF
When yous need aid, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that volition requite yous answers and help you go the about out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. All-time of all, it'southward totally Complimentary, and it's just some other reason that you get more at Sweetwater.com.
Adat Not Reading Ua Apollo Focusrite Saffire Pro
Source: https://www.sweetwater.com/sweetcare/articles/connecting-scarlett-adat/